PRODUCTS
Choose a category :
 - ACCESSORIES - GENSET CONTROL - PARALLELING - SOFTWARES - MARINE - SALES TOOLS - SERVICES - 

   

   

Sales Tools



ACCESSORIES
   
BATTERY CHARGERS

    BP - 5 to 40A and 12-24V

BP series
BATTERY CHARGERS
     BPRB 5 to 20A and 12-24V

BPRB series
BATTERY CHARGERS
               
               
    COMPACT series

COMPACT series
BATTERY CHARGERS
Tiny, efficient and advanced technology
   
               
               
MAGNETIC PICKUP

    MPU

MAGNETIC PICKUP

   
               
               
POWER METERING

    PM-P

PM PROGRESS
The PM-Progess is a multifunction power metering system which displays 17 electrical and power quality parameters.
     PM-A

PM ADVANCED
The PM-Advanced is a powerful multifunction power metering system and can measure more than 60 parameter
               
               


GENSET CONTROL
   
MANUAL START

    MDM A60Z3

MDM
MANUAL START UNIT
   
               
               
AUTO TRANSFER SWITCH

      A63Z2

ICGEN2.0
The ICGEN 2.0 is a complete auto transfer switch controller with remote start/stop for a single generating set operating in standby mode. All mains parameters are checked and in case of failure, the controller will provide a remote start signal to the generator. When the mains reappear, the ICGEN 2.0 opens the genset breaker, switches back the load on the mains and stops the generator after a programmable cooling time.
     MNS A60W1

MNS
AUTO TRANSFER SWITCH
               
               
AUTO MAINS FAILURE

    A62Z0

TCGEN
Automatic mains failure unit with remote display
     A63Z0

TCGEN 2.0
Automatic and manual mains failure unit
               
               
AUTO START

      A63Z1

ACGEN2.0
The ACGEN 2.0 is a complete auto start controller with remote start/stop for a single generating set operating in standby mode. The ACGEN 2.0 controller is used for automatic and manual control of generators. The test feature allows you to set various daily or weekly self tests of the generator. The module also handles OpEx feature for the control of fuel costs.
     MDA - A60Y1

MDA
Auto start/stop module
               
               
ENGINE MONITORING

    BSM II A43Z0

BSM II
Acquisition and surveillance unit for installations and combustion engines with extented capacities of communication. For archiving, monitoring and remote surveillance
     A61Z0 / Z1

BSD / BSD Plus
remote management of generating sets
               
               


PARALLELING
   
ALL IN ONE / GENSYS RANGE

    GENSYS A40Z0

GENSYS
Complete generating set controller
     A53Z0

GENSYS 2.0
The Gensys 2.0 is a control unit for electrical panels generators.
               
               
    A40Z0-OPT2

GENSYS - OPTION MAINS PARALLELING
Single genset in parallel with mains
     A40Z0- OPT4

GENSYS - OPTION bus CAN MTU + J1939
CAN bus connection to MTU MDEC
               
               
    GENSYS - ACCESSORIES

GENSYS - ACCESSORIES
Gensys accessories : Test bench, oil pressure sender, water temp sender.
     GENSYS - CABLES

GENSYS - CABLES
Gensys cables
               
               
    A53Z2

GENSYS 2.0 LT
Designed for generator electrical panels and with analogue load sharing line, Gensys 2.0 LT is new" all-in-one "genset unit is also fully compatible with all speed governors and AVR. and combines all necessary function.This new genset unit takes up the challenge to combine reliability with a friendly use and programming.
     A53Y0

RDM 2.0
Remote display module for all-in-one genset control and paralleling unit
               
               
    GENSYS - I/O EXTENSIONS

GENSYS - I/O EXTENSIONS
Gensys Input/Output extensions
     GENSYS 2.0 CORE

GENSYS 2.0 CORE
Core unit for all-in-one genset control and paralleling unit with integrated PLC
- Rear mounted control and paralleling module
- Connected to the remote display module RDM 2.0
- Internal logic sequences, programmable by equations
- I/O flexibility
- 5 isolated serial ports: RS485, 2 CAN bus, Ethernet, SD card reader
- Fully compatible with all speed governors and AVRs
- Redundancy on critical applications
               
               
SYNCHROSCOPE

    C2S A25Z0

C2S
Auto Synchronizer and Safety Column to control the paralleling of two alternating power sources.
     A60X1

SCR
Le SCR est un synchronoscope géré doté d’un relais de synchronisation programmable, dans un boitier DIN 72, qui se monte par l’avant.
               
               
SYNCHRONISER - LOAD SHARER

    DUOGEN A40R0

DUOGEN
Automatic synchronization and load sharing of two generating sets controlled by a single module.
     UNIGEN A51Z2

UNIGEN
Generating set Auto Synchroniser and load sharer.
               
               
    UNIGEN PLUS A51Z1

UNIGEN PLUS
Generating set Auto Synchroniser and load sharer.
     UNIGEN ILS A51Z3

UNIGEN ILS
Generating set load sharer.
Replacement for DYN2-80100 and DYN2 80108/9.
               
               
MAINS PARALLELING

    CPA A24Z0

CPA
Active power converter.
     GCR A09Tx

GCR
Digital power plant commander for generating sets paralleled to the commercial power.
               
               
    A54Z0

MASTER 2.0
Complete power plant controller with mains paralleling


SOFTWARES
   
GENSYS FAMILY

    EASY PLC

EASY PLC
CRE’s Easy PLC is a logic editor which provides graphical interface to program PLC equations. The tool is able to generate CRE propriety equations on GENSYS 2.0 family.
     CRE CONFIG

CRE CONFIG
- Easy-to-use software
- Different modes
- Full parameters configuration
- Real-time monitoring
               
               
ACGEN2.0 / ICGEN2.0 / TC GEN2.0

      CRE Monitor Utilities

CRE Monitor Utilities

   
               
               
BSD/BSD PLUS

    BSD Config

BSD Config
Configuration software of:
- BSD
- BSD PLUS
   
               
               
UNIGEN FAMILY

    CRE CONFIG

CRE CONFIG
- Easy-to-use software - Different modes - Full parameters configuration - Real-time monitoring


MARINE
   
POWER MANAGEMENT

    GENSYS A40Z1

GENSYS MARINE
Auxiliary generating set power management
     A53Z4

GENSYS 2.0 CORE MARINE
Core unit for all-in-one genset control and paralleling unit with integrated PLC:PMS
               
               
    A53Z3

GENSYS 2.0 MARINE
All-in-one paralleling unit for marine applications : PMS
     A53Y3

RDM 2.0 MARINE
Remote display module for all-in-one genset control and paralleling unit
               
               


SALES TOOLS
   
      CRE CATALOGUE 2013

CRE CATALOGUE 2013
CRE CATALOGUE 2013


SERVICES
   
FIELD SERVICE

    RMA form

RMA
Find the RMA form and the Repair procedure note.
    

TECHNICAL SUPPORT
Our team of dedicated engineers will help you on the field, by e-mail, or over the phone on: +33 492 38 86 86.
               
               
   

REPAIR CENTER & WARRANTY
If you have a product that is in need of repair, our dedicated repair service after a complete diagnosis and will ensure your product is absolutely reliable.
   
               
               
APPLICATION ENGINEERING

   

APPLICATION ENGINEERING

   
               
               
ON SITE SERVICES

   

TROUBLESHOOTING
Our experts can provide a complete on-site diagnostics, troubleshooting or start-up assistance.
    

COMMISSIONING
We can help you from commissioning right through to on-site supervision.
               
               
TRAININGS

   

TRAININGS


 
 
© 2014 CRE Technology
Powered by Ideal-com